|
PRESS RELEASE: Progressive Epoxy Polymers, Inc.
adds a flexibilized version of its Corro Coat FC 2100 epoxy to
its line of Epoxies ® (The Finest Trans-surface Epoxies).
11/03 Pittsfield, NH: Progressive Epoxy Polymers, Inc., suppliers
of Marine Epoxies ® - ("The Finest Trans-surface Epoxies")
has announced the introduction of a flexibilized version of their
Corro-Coat FC 2100 epoxy which joins the other products in their
family of FC 2100 epoxies (INCLUDING FC 2100 FAST - A MAINTENANCE
COATING FOR WINTER TEMPERATURES - WORKS UNDERWATER!).
The increased flexibility of the new FC 2100 (Corro
- Coat FC 2100 FLEX) provides better impact resistance than the
standard FC 2100. It utilizes a solvent-free, non hazmat formulation
for application on wet, damp, or saturated surfaces (even underwater).
Easy 1:1 mix ratio. 2- gal kit $180.
Other epoxies in the FC 2100 family include:
Standard Corro Coat FC 2100. A solvent free, non-hazmat,
kevlar (tm) and ceramic reinforced, brushable epoxy that can be
applied to dry, damp or submerged surfaces. Simple 2:1 mix ratio.
A hard, rigid epoxy for maximum wear and abrasion resistance.
1.5 gal kit $130.
FC 2100 N - a solvent free, non-hazmat Novolac version
of the standard 2100. Offers enhanced chemical resistance. Easy
2:1 mix ratio. 1.5 gal kit $145.
FC 2100 FAST - a cold weather version of FC 2100
for application on dry, damp or submerged surfaces in the 35 -
60 degree F range. Requires Hazmat shipping. Easy 2:1 mix ratio.
1.5 gal kit $145.
FC 2100 HT - a version of 2100 designed for higher
temperature applications. Requires Hazmat shipping. 4:1 mix ratio.
1.25 gal kit $155.
WET / DRY 700 - a paste version of FC 2100 is also
available under the WET / DRY 700 label. Non hazmat to ship, solvent
free "oatmeal" thick coating with Kevlar (tm) microfibers.
Easy 1:1 mix ratio - color is white. A "quick setting"
mercaptan based 5 - 20 minute version is available as Quick Fix
2300 (also non hazmat and solvent free). 1 gal kit $76.
The Corro-Coat FC 2100 family of epoxies is part
of Progressive Epoxy Polymers, Inc.'s line of Marine Epoxies -
providing the right epoxy product for every situation. FC 2100
was originated as a "formulating makeover" and performance
upgrade to an previous older line of Kevlar (tm) enhanced epoxies
offered by Progress Epoxy Polymers. The company also offers a
complete line of epoxy putties, marine epoxies, NSP approved epoxies,
fillers and thickeners.
All the FC 2100 epoxies are available for resell
and private labeling. Typical applications include tanks, pits,
sumps, coolers, and marine barrier coats.
For additional information, visit the Progressive
Epoxy Polymers, Inc. websites at: https://www.epoxyproducts.com.
Technical contact: Paul Oman
info@epoxyproducts.com.
603-435-7199
OTHER NEWS:
Our recently added EZ thick epoxy thickener has
been very popular and is much easier to stir into epoxy than our
fumed silica. In water absorption tests, both the EZ Thick and
the fumed silica both exhibited zero water gain after five days
of immersion. We have also added wood flour. The EZ Thick and
the wood flour stir into epoxy equally well and both are priced
the same - 4 quarts (1 gallon) for $17. Also, our walnut anti-slip
is now stocked in too different grain sizes.
We're replaced our high temp/chem resistant NOVA
CLEAR with a new formulation, now called NOVA CLEAR 2. More gentle
exotherm and longer potlife.
We keep adjusting our line of products and now have
a "discount site" for overstock, old inventory, discontinued
products, etc. Visit it at https://www.epoxyoutlet.com
Under "most amazing product' we would have
to suggest our one part aluminum filled, moisture cured urethane
(aluthane). What a primer, sealer, etc. Gives a galvanized look
to surfaces. Really stops the rust cold and looks great as a primer
or topcoat.
Finally, our epoxies saved a sinking yacht in Papua New Guinea.
Read about it at https://www.epoxyproducts.com/cs_boat.html
Possible new product in testing: a solvent free (100% solids)
clear 2 part urethane. No epoxy yellowing, no solvent fumes, wet
thickness equals dry thickness.
PAUL OMAN ----- Progressive Epoxy Polymers, Inc.
Frog Pond Hollow - 48 Wildwood Dr - Pittsfield NH 03263
10-4 Monday-Thur EST 603-435-7199 VISA/MC/Discover
info@epoxyproducts.com
https://www.epoxyproducts.com
Boating site: https://www.epoxyproducts.com/marine.html
|
